May 10, 2024  
University Catalog 2017-2018 
    
University Catalog 2017-2018 [ARCHIVED CATALOG]

Course Descriptions


Courses are numbered as follows: freshmen, 100-level; sophomores, 200-level; juniors, 300-level; seniors, 400-level; graduate students, 500- & 600-level. Certain 400-level courses may be taken by graduate students for graduate credit; in such cases, graduate students complete additional research assignments to bring the courses up to graduate level rigor. The letter G in parentheses, (G), appears at the end of those 400-level undergraduate course descriptions which are approved for graduate level work. When taught for graduate credit, those courses are taught by Graduate Faculty. Only students admitted to the Graduate School may enroll in 500- & 600-level courses.

No credit is allowed in any curriculum for any course with a catalog number beginning with zero (0) (e.g. ENGL 099 ).

The numerical listing after each course title gives the following information: the first number represents lab hours per week; the second digit represents the number of 75-minute lecture periods per week; the third digit represents the semester credit hours earned for successful completion of the course. A few courses will have a fourth digit in parentheses. This means the course may be repeated for credit and the fourth digit designates the total amount of semester hour credit that may be earned including repetition of the course. Typically, these courses are research-, performance-, or project-oriented and found in the 300-, 400-levels (undergraduate student) or 500-, 600-levels (graduate student).

Some courses require the student to complete a prerequisite course or to secure special permission from faculty prior to enrolling in the course. These prerequisites are listed immediately after the numerical semester credit hour designations. Each student is responsible for complying with prerequisite course work requirements and special instructions.

NOTES:

  1. Courses designated with an asterisk * mean this course will be accepted for General Education Requirement (GER) transfer credit. A course MAY or MAY NOT be accepted as equivalent to or substitute for a course in a specific discipline or major. Please check the Board of Regents web site at www.regents.state.la.us/ and the school you are transferring to for additional information.
  2. Courses with the designation (IER) meet the Board of Regents International Education Requirement.
  3. Students with a Freshman or Sophomore classification are not eligible to register for 400-level (Senior) courses without the written approval of the Academic Dean (or the Dean’s designated representative) of the college responsible for that specific subject and course)
  4. Course offerings for each term are made available prior to Early Registration via the BOSS website (“Available Course Sections”) and in .pdf format on the Registrars website (Quarterly Schedule of Classes-The Racing Form). Quarterly offerings are subject to change to accommodate the needs of students.

Louisiana Common Course Numbering (LCCN).

Louisiana uses a statewide common course numbersing system “…to facilitate program planning and the transfer of students and course credits between and among institutions.” Faculty representatives from all of the public colleges and universities worked to articulate common course content to be covered for each course included on the Board of Regents Master Course Articulation Matrix. Beginning with General Education Requirements (GER), this initiative will continue with an eye toward expansion throughout the entire Matrix.

Each course is identified by a 4-Alpha character “rubric” (i.e. prefix or department abbreviation) and a four-digit number. Each 4-Alpha rubric begins with “C” to signify that it is a state “Common” number, followed by a standard discipline abbreviation so that when they are included in campus catalogs and web sites, its meaning will be clear. For example, “CMAT” is the standardized LCCN abbreviation for Mathematics courses included in the Statewide Course Catalog. Another example would be “CENL” for English courses.

The 4-Alpha character rubric is followed by four digits, each with their own positional meaning. The first digit of the course number denoteds the academic level of the course (1 = freshman/1st year; 2 = sophomore/2nd year). The second and third digits establish course sequencing and/or distinguish the course from others of the same level, credit value, and rubric. The fourth digit denotes the credit value of the course in semester hours. For example, CMAT 1213 College Algebra (Common, Mathematics, Freshman/1st year, articulated standard sequence 21, 3 semester hours, College Algebra); CENL 1013 English Composition I (Common, English, Freshman/1st year, articulated standard sequence 01, 3 semester hours, English Composition I.

All rubric/number course identifiers correspond to course descriptiors listed in the Statewide Course Catalog, published by the Louisiana Board of Regents with direct faculty input.The Statewide Course Catalog will comprise the academic courses for which there is statewide agreement among discipline faculty representatives as to the minimum course content to be covered so that a student completing the course will be ready for the next course for which it is a prerequisite in a sequence or curriculum. Louisiana Tech University courses that are part of the Statewide Common Course Catalog can be readily identified by the [LCCN: AAAA####] at the end of the course description.

The Master Course Articulation Matrix, and the Louisiana Statewide Common Course Catalogue can be found on the Louisiana Board of Regents website (www.regents.doa.louisiana.gov under the Academic Affairs menu option.)

 

Mechanics and Materials

  
  • MEMT 511: Modern Engineering Materials

    3 Semester Credit Hours . An introduction to modern engineering materials with an emphasis on light weight or high strength materials such as polymers, composites, and high strength steels.
  
  • MEMT 517: Advanced Durability of Materials

    3 Semester Credit Hours . Prerequisite ENGR 220  and MEMT 201  This course examines advanced engineering aspects of corrosion, fatigue, and fracture, how service environment influences design, and how to analyze, predict or prevent these influences.
  
  • MEMT 563: Theory of Elasticity

    3 Semester Credit Hours . General equations of elasticity; plane stress and plane strain; torsion and flexure of bars; Hertz contact stresses.
  
  • MEMT 564: Plates and Shells

    3 Semester Credit Hours . Pure bending of plates; laterally-loaded plates; membrane theory of shells; bending of cylindrical and spherical shells.
  
  • MEMT 565: Continuum Mechanics

    3 Semester Credit Hours . Introductory treatment of the fundamental, unifying concepts of the mechanics of continua.
  
  • MEMT 577: Advanced Strength of Materials

    3 Semester Credit Hours . Energy methods, advanced bending theory, stress concentrations, failure theory and elastic stability.
  
  • MEMT 588: Inelastic Deformation

    3 Semester Credit Hours . Analytical and numerical modeling of inelastic deformation in metals, polymers and ceramics, including plasticity, creep, Viscoelasticity, and Viscoplasticity.

Merchandising and Consumer Studies

  
  • MCS 108: Professional Career Orientation

    2 Semester Credit Hours . Structured experiences in career assessment and exploration, leadership, and communication in the MCS industry. Open to non-majors.
  
  • MCS 118: Pattern Appl and Construction

    3 Semester Credit Hours . Introduction to basic clothing construction and fit. Emphasis on techniques, commercial patterns, and ready-to-wear construction.
  
  • MCS 208: Int To The Merchandising Indstry

    3 Semester Credit Hours . Survey of merchandising industry from conception to consumer use. Career assessment and exploration in the MCS industry. Open to non-majors.
  
  • MCS 219: Textiles

    3 Semester Credit Hours . Study of fiber properties and production of textiles including introduction to basic textile testing and performance evaluation.
  
  • MCS 220: Textiles Lab

    1 Semester Credit Hours . Prerequisite MCS 219 Introduction to basic textile testing.
  
  • MCS 229: Product Quality Analysis

    3 Semester Credit Hours . Analysis and evaluation of apparel product development and manufacturing. Focus on design, style, and construction specifications as related to quality, price, and performance.
  
  • MCS 238: Cultural Perspectives in Fashion

    3 Semester Credit Hours . Study of meanings of dress and appearance with emphasis on needs of individuals and families with recognition of cultural, aesthetic, economic, and psychological factors.
  
  • MCS 246: Computer Applications in Personal and Family Management

    3 Semester Credit Hours . An introduction to the use of word processing, spreadsheet, and presentation software for more effective management of personal and family related tasks.
  
  • MCS 248: Fashion Merchandising Software

    3 Semester Credit Hours . Computer applications in industry-based software. Focus on design basics and digital portfolio development for merchandising.
  
  • MCS 256: Individual and Family Management

    3 Semester Credit Hours . A systems approach to the management of personal and family related tasks.
  
  • MCS 268: Product Design

    3 Semester Credit Hours . Prerequisite MCS 118 , MCS 219 , AND MCS 248 . Application of principles related to the creation, fabrication and execution of product design.
  
  • MCS 275: Family and Consumer Financial Decision Making

    3 Semester Credit Hours . Behavior of the consumer with reference to economic decision making and expenditure patterns relevant to current lifestyles.
  
  • MCS 298: Field Study Tour in Merchandising and Consumer Studies

    1 (3) Semester Credit Hours . Prerequisite Application Required. Structured educational field study experiences in merchandising, marketing, and/or design. Application required. May be repeated up to three times for credit.
  
  • MCS 308: Merchandising Buying and Management

    3 Semester Credit Hours . Prerequisite MCS 208  and ACCT 201  Concepts and theories in buying and management of merchandise in retail organizations.
  
  • MCS 326: Promotions

    3 Semester Credit Hours . Prerequisite MCS 248  Techniques and principles in the promotion of products and services for targeted consumer segments, with an emphasis on communication and print media presentation.
  
  • MCS 368: Multi-Channel Retailing

    3 Semester Credit Hours . Study of and analysis of strategies used by retailers to integrate product marketing with emphasis on e-tailing, m-commerce, and direct marketing.
  
  • MCS 388: Retail Event Planning and Coordination

    3 Semester Credit Hours . Study and application of principles associated with planning, promoting, and coordinating special events for a variety of audiences.
  
  • MCS 419: Textile Design

    3 Semester Credit Hours . Prerequisite MCS 268  Study of textile design with an emphasis on industry processes, end-use, product quality, and technology.
  
  • MCS 426: Trends in Housing

    3 Semester Credit Hours . Social aspects of housing including zoning, government regulations, and purchase considerations.
  
  • MCS 429: Global Fashion Retailing

    3 Semester Credit Hours . Prerequisite MCS 208  Domestic and international issues, including legislation and trade regulations, that arise among sellers, government, and consumers.
  
  • MCS 439: Historic Costume I

    3 Semester Credit Hours . Development of costume prior to 1800 with emphasis on social, economic, and aesthetic influences on its design.
  
  • MCS 440: Historic Costume II

    3 Semester Credit Hours . Development of costure since 1800, with emphasis on social, economic, and aesthetic influences.
  
  • MCS 446: Advanced Computer Applications for Personal and Family Management

    3 Semester Credit Hours . Prerequisite MCS 246  Advanced study in the use of microcomputers in personal and family management.
  
  • MCS 466: Consumer Relations

    3 Semester Credit Hours . Prerequisite HEC 327 or JOUR 450  or consent of instructor. Professional strategies and tactics in consumer studies programs.
  
  • MCS 468: Apparel Design II

    3 Semester Credit Hours . Prerequisite MCS 268  Flat pattern and draping techniques in developing original design, including an introduction to pattern making software.
  
  • MCS 488: Visual Merchandising

    3 Semester Credit Hours . Prerequisite MCS 248  Promotion of products through Visual merchandising techniques including display, store layout and design.
  
  • MCS 498: Field Study in Merchandising and Consumer Studies II

    3 (6) Semester Credit Hours . Prerequisite Application Required Structured educational experiences in major domestic or international industry centers. Application required.
  
  • MCS 590: Trends in Merch and Cons Studies

    3 Semester Credit Hours . An in-depth study of selected topics related to current issues, developments, and future projections in the field of merchandising and consumer studies.

Micro Systems Engineering

  
  • MSE 401: Fundamentals of Microfabrication Processes

    3 Semester Credit Hours . Prerequisite PHYS 202  and MATH 245  Study of microfabrication processes including patterning, additive, and etching processes used for the realization of microelectronic ultra large-scale integration (ULSI) and microelectromechanical systems (MEMS) technologies.
  
  • MSE 402: Micro/Nanoelectromechanical Systems

    3 Semester Credit Hours . 0-3-3 Prerequisite ELEN 334   Physical, mechanical, chemical, and electrical operation principles of microelectromechanical systems (MEMS).  Actuation, engineering design and fabrication economics of MEMS devices.  Introduction to nanoelectromechanical systems (NEMS). 
  
  • MSE 403: Microfabrication Applications and Device Fabrication

    3 Semester Credit Hours . Prerequisite MSE 402 . Microfabrication processes, process integration and applications for the realization of microelectromechanical and microelectronic devices.
  
  • MSE 404: Advanced Materials for Micro/Nano Devices and Systems

    3 Semester Credit Hours . Prerequisite MEMT 201  and ELEN 334 . Fundamentals of advanced materials used for the realization of micro/nano devices and systems, emphasizing the properties and characteristics of various materials.
  
  • MSE 405: Nanotechnology Principles

    3 Semester Credit Hours . Fundamentals of nanotechnology, emphasizing the bacis principles, materials, fabrication, measurement, and applications of nanotechnology.
  
  • MSE 406: Micro/Nano Scale Materials Measurements and Analysis

    3 Semester Credit Hours . Prerequisite PHYS 202  Fundamentals of micro/nano scale materials measurements and analysis, based on modern techniques.
  
  • MSE 407: Advanced Microfabrication W/Cad

    3 Semester Credit Hours . Prerequisite MSE 401  Advanced microfabrication process development and integration with the aid of computer-aided process modeling and simulation.
  
  • MSE 457: Special Topics: Micro Systems Engineering

    3 (9) Semester Credit Hours . The topic of topics will be selected by the instructor from the various sub-areas of micro systems engineering. May be repeated for a maximum of 9 credit hours with a change of course content.
  
  • MSE 501: Fundamentals of Microfabrication Processes

    3 Semester Credit Hours . Study of microfabrication processes including patterning, additive, and etching processes used for the realization of microelectronic ultra large-scale integration (ULSI) and microelectromechanical systems (MEMS) technologies.
  
  • MSE 502: Microsystems Principles

    3 Semester Credit Hours . Prerequisite MSE 501 . Application of engineering design and analysis procedures for equipmentand microfabrication processes utilized in the manufacture of microelectronic and microelectromechanical systems (MEMS).
  
  • MSE 503: Microfabrication Laboratory

    1 Semester Credit Hours . Prerequisite MSE 502 . Laboratory experience in the fabrication of a microelectronic or microelectromechanical device using a variety of microfabrication processes.
  
  • MSE 504: Advanced Materials for Micro/Nano Devices and Systems

    3 Semester Credit Hours . Prerequisite MSE 501 . Fundamentals of advanced materials used for the realization of micro/nano devices and systems, emphasizing the properties and characteristics of various materials.
  
  • MSE 505: Nanotechnology Principles

    3 Semester Credit Hours . Fundamentals of nanotechnology, emphasizing the basic principles, materials, fabrication, measurement, and applications of nanotechnology.
  
  • MSE 506: Micro/Nano Scale Materials Measurements and Analysis

    3 Semester Credit Hours . Fundamentals of micro/nano scale materials measurements and analysis, based on modern techniques.
  
  • MSE 507: Advanced Microfabrication With Computer-Aided Design

    3 Semester Credit Hours . Prerequisite MSE 503 . Advanced microfabrication process development and integration with the aid of computer process modeling and simulation.
  
  • MSE 508: Advanced Microelectronic Devices With Computer-Aided Design

    3 Semester Credit Hours . Prerequisite MSE 507 , ELEN 535 . Principles of operation and analysis of advanced microelectronic devices with the aid of computer device modeling and simulation.
  
  • MSE 510: Microsystems Design, Fabrication, and Testing Laboratory

    3 Semester Credit Hours . Prerequisite MSE 502 . Corequisite MSE 503 . 1-3. The design, fabrication, and testing of a simple microsystem, leading to a detailed technical project report. This course is available to masters students in the Microsystems Engineering program only.
  
  • MSE 512: Biotechnology Principles

    3 Semester Credit Hours . Fundamentals of molecular biotechnology, emphasizing the basic principles, the tools and techniques employed, and the widespread applications of this technology.
  
  • MSE 557: Special Topics: Micro Systems Engineering

    3 (9) Semester Credit Hours . The topic or topics will be selected by the instructor from the various sub-areas of micro systems engineering. May be repeated as topic changes.
  
  • MSE 609: Microsystems Analysis With Computer-Aided Design

    3 Semester Credit Hours . Prerequisite MSE 507 . Principles of operation of microsystems and their analysis with the aid of coputer-based design and modeling tools.
  
  • MSE 610: Microsystems Design With Computer-Aided Design

    3 Semester Credit Hours . Prerequisite MSE 609 . Design and development of microsystems with the aid of computer-based design and modeling tools.

Molecular Sciences and Nanotechnology

  
  • MSNT 502: Research Methods

    3 Semester Credit Hours . An introduction to basic methods used in scientific research, including formulation of problems, literature search, proposal preparation, and communication of research findings.
  
  • MSNT 503: Topics in Molecular Sciences and Nanotechnology

    1-3 (6) Semester Credit Hours . Independent study. Topics and course policies to be established by instructor for each student. May be repeated for credit up to 6 semester hours with topic change.
  
  • MSNT 503A: Topics in Molec Sci and Nanotech

    1 (6) Semester Credit Hours . Independent study. Topics and course policies to be established by instructor for each student. May be repeated for credit up to 6 semester hours with topic change.
  
  • MSNT 503B: Topics in Molec Sci and Nanotech

    2 (6) Semester Credit Hours . Independent study. Topics and course policies to be established by instructor for each student. May be repeated for credit up to 6 semester hours with topic change.
  
  • MSNT 503C: Topics in Molec Sci and Nanotech

    3 (6) Semester Credit Hours . Independent study. Topics and course policies to be established by instructor for each student. May be repeated for credit up to 6 semester hours with topic change.
  
  • MSNT 504: Molecular Sciences and Nanotechnology Seminar

    1 Semester Credit Hours . Supervised organization and presentation of topics from peer-reviewed literature or student’s own research, as well as attendance at and recording of seminars given by others. Maximum credit applicable towards the degree is one semester hour.
  
  • MSNT 505: Nanotechnology Principles

    3 Semester Credit Hours . Fundamentals of nantochnology, emphasizing the basic principles, materials, fabrication, measurement, and applications of nanotechnology.
  
  • MSNT 506: Nanofabrication By Self-Assembly

    3 Semester Credit Hours . Principles and techniques for self-assembly of films and structures on the nanometer scale. Topics covered will include Langmuir-Blodgett, nanolithography and nanodevices based on nanoassembly, layer-by-layer self-assembly techniques, and electrochemical polymerizations.
  
  • MSNT 510: Selected Topics in Molecular Sciences

    3 (6) Semester Credit Hours . Topic or topics will be selected by the instructor from the various scientific disciplines that fall under the umbrella of molecular sciences. May be repeated for credit up to 6 semester hours with topic change.
  
  • MSNT 511: Selected Topics in Nanotechnology

    3 (6) Semester Credit Hours . The topic or topics will be selected so as to expose students to current research areas in nanotechnology. May be repeated for credit up to 6 semester hours with topic change.
  
  • MSNT 521: Principles of Cell and Molecular Biology

    3 Semester Credit Hours . Principles of cell and molecular biology, including molecular structure and function, cellular processes, bioenergetics, and regulation of metabolism.
  
  • MSNT 549: Practicum in Molecular Sciences and Nanotechnology

    3 Semester Credit Hours . Prerequisite 12 semester hours of graduate work. Pass/Fail). Experimental or comutational study of a relevant problem in one of molecular sciences and nanotechnology research areas.
  
  • MSNT 551: Research and Thesis in Molecular Sciences and Nanotechnology

    3 (6) Semester Credit Hours . Prerequisite 12 semester hours of graduate work. Registration in any quarter is for three semester hours credit or multiples thereof. Maximum credit applicable towards the degree is 6 semester hours. (Pass/Fail)
  
  • MSNT 551C: Res and Thesis Molec Sci and Nanotec

    3 (6) Semester Credit Hours . Prerequisite 12 semester hours of graduate work. Registration in any quarter is for three semester hours credit or multiples thereof. Maximum credit applicable towards the degree is 6 semester hours. (Pass/Fail)
  
  • MSNT 551F: Res and Thesis Molec Sci and Nanotec

    3 (6) Semester Credit Hours . Prerequisite 12 semester hours of graduate work. Registration in any quarter is for three semester hours credit or multiples thereof. Maximum credit applicable towards the degree is 6 semester hours. (Pass/Fail)
  
  • MSNT 604: Doctoral Candidate Seminar in Molecular Sciences and Nanotechnology

    1 Semester Credit Hours . 0-1-1 The seminar will cover presentations by students who have been admitted to candidacy, faculty and distinguished visitors.  One semester hour will apply toward the degree.  (Pass/Fail)

     

  
  • MSNT 611: Dissertation Enhancement Seminar

    1 Semester Credit Hours . 0-1-1 (3) Seminars and group discussions on research methodologies, emerging topics in the discipline, and professional development.  Maximum credit applicable towards a degree is 3 semester hours.  (Pass/Fail).

     

  
  • MSNT 650: Dir Study in Molecular SciandNano

    1-3 (6) Semester Credit Hours . Prerequisite Permission of Instructor Directed in-depth study of a highly specialized topic for doctoral students. Topics and course policies to be established by instructor for each student.
  
  • MSNT 650A: Dir Study in Molecular SciandNano

    1 (6) Semester Credit Hours . Prerequisite Permission of Instructor Directed in-depth study of a highly specialized topic for doctoral students. Topics and course policies to be established by instructor for each student.
  
  • MSNT 650B: Dir Study in Molecular SciandNano

    2 (6) Semester Credit Hours . Prerequisite Permission of Instructor Directed in-depth study of a highly specialized topic for doctoral students. Topics and course policies to be established by instructor for each student.
  
  • MSNT 650C: Dir Study in Molecular SciandNano

    3 (6) Semester Credit Hours . Prerequisite Permission of Instructor Directed in-depth study of a highly specialized topic for doctoral students. Topics and course policies to be established by instructor for each student.
  
  • MSNT 651: Pre-Candidacy Doctoral Research

    1-9 Semester Credit Hours . Prerequisite Pre-candidacy doctoral students only Registration in any quarter is for 1 to 3 semester hours or multiples thereof, up to a maximum of 9 semester hours per quarter.  Maximum credit applicable towards the degree is 9 semester hours.  (Pass/Fail)
  
  • MSNT 651A: Research and Dissertation

    . Prerequisite Permission of Instructor Registration in any quarter may be for 3 semester hours or multiples thereof, up to a maximum of 9 semester hours per quarter. Maximum total credit allowed is 30 hours. (Pass/Fail)
  
  • MSNT 651C: Research and Dissertation

    . Prerequisite Permission of Instructor Registration in any quarter may be for 3 semester hours or multiples thereof, up to a maximum of 9 semester hours per quarter. Maximum total credit allowed is 30 hours. (Pass/Fail)
  
  • MSNT 651F: Research and Dissertation

    . Prerequisite Permission of Instructor Registration in any quarter may be for 3 semester hours or multiples thereof, up to a maximum of 9 semester hours per quarter. Maximum total credit allowed is 30 hours. (Pass/Fail)
  
  • MSNT 651I: Research and Dissertation

    . Prerequisite Permission of Instructor Registration in any quarter may be for 3 semester hours or multiples thereof, up to a maximum of 9 semester hours per quarter. Maximum total credit allowed is 30 hours. (Pass/Fail)
  
  • MSNT 657: Selected Topics in Molecular Sciences and Nanotechnology

    3 Semester Credit Hours . Prerequisite PERMISSION OF INSTRUCTOR Lectures to be selected by the instructor on topics in molecular biology, chemistry, materials science, or nanotechnology.
  
  • MSNT 685: Doctoral Qualifying Examination

    No credit Semester Credit Hours . Prerequisite Doctoral standing required. Required for all students seeking to take the qualifying examination in Molecular Sciences and Nanotechnology. May be repeated only once. (Pass/Fail)
  
  • MSNT 686: Oral Comprehensive Examination

    No credit Semester Credit Hours . Prerequisite Preq. or Coreq. MSNT 685   Required of all students seeking to take the oral comprehensive examination for the Ph.D. in Molecular Sciences and Nanotechnology. Successful completion is a pre-requisite for admission to candidacy. May be repeated only once.  (Pass/Fail)
  
  • MSNT 751: Post-Candidacy Dissertation Research

    1-9 Semester Credit Hours . Prerequisite MSNT 686  and Post-candidacy doctoral students only Registration in any quarter is for 1 to 3 semester hours or multiples thereof, up to a maximum of 9 semester hours per quarter.  Maximum credit applicable towards the degree is 9 semester hours.  (Pass/Fail)

Music Applied

  
  • MUAP 100: General Recital

    0 Semester Credit Hours . A weekly, live performance laboratory for all music majors and minors taken concurrently with private lessons. Includes evening recital and concert attendance as required by the respective private lesson studio.
  
  • MUAP 102: Class Voice

    1 Semester Credit Hours . Group instruction in the techniques of the singing voice.
  
  • MUAP 111: Class Piano I - Major

    1 Semester Credit Hours . Prerequisite Permission of instructor. Introduction to the piano for the music major. Students work on rading two clefs, basic piano technique, sightreading, and repertory.
  
  • MUAP 112: Class Piano II - Major

    1 Semester Credit Hours . Prerequisite MUAP 111  or permission of instructor. Continuation of MUAP 111 , with more fundamental playing skills. students work on two octave scales, harmonization, sightreading, and repertory.
  
  • MUAP 113: Class Piano III - Major

    1 Semester Credit Hours . Prerequisite MUAP 112  or permission of instructor. Continuation from MUAP 112 . Students work on more advanced playing skills, improvisation, and score-reading.
  
  • MUAP 201: Jazz Improvisation

    2 Semester Credit Hours . 2-0-2 (6) Prerequisite MUTH 102  or Consent of Instructor Instruction in beginning jazz improvisation.  Course may be repeated for credit up to three times.

     

  
  • MUAP 232: French Diction

    1 Semester Credit Hours . Pronunciation of French art song (melodie).
  
  • MUAP 233: Italian Diction

    1 Semester Credit Hours . Pronunciation of Italian art song.
  
  • MUAP 234: German Diction

    1 Semester Credit Hours . Pronunciation of German art song (Lieder).
  
  • MUAP 399: Half Recital

    0 Semester Credit Hours . Prerequisite Recital Committee approval For all music majors, preparation and performance of a degree recital of not less than 25 minutes of music.
  
  • MUAP 499: Full Recital

    0 Semester Credit Hours . Prerequisite Recital Committee approval For Bachelor of Arts, Music Performance concentration degree candidates, preparation and performance of a degree recital of not less than 50 minutes of music.

Music Applied Private Lessons

  
  • MUPV 111: Applied Piano - Minor

    1 Semester Credit Hours . Prerequisite Concurrent w/ MUAP 100 
  
  • MUPV 131: Applied Voice - Minor

    1 Semester Credit Hours . Prerequisite Concurrent w/ MUAP 100 
  
  • MUPV 151: Applied Violin - Minor

    1 Semester Credit Hours . Prerequisite Concurrent w/ MUAP 100 
 

Page: 1 <- Back 1027 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 -> 42